Vanair Manufacturing

Your Mobile Power Solution Provider Since 1972™

Vanair Manufacturing

Flexible Power Combinations Air Compressor and Hydraulics Output

Like its counterpart, the PowerFlex™ AH is equipped with a 40 CFM at 150 PSI rotary screw air compressor, but instead of a generator it is equipped with a hydraulic pump, providing 13 GPM and up to 3000 PSI with an integrated hydraulic reservoir. Tier 4 Final compliant, the PowerFlex™ AH is small enough to fit in a variety of load spaces.

  • Literature
  • Product Specifications
  • Special Features
  • Options/Accessories
  • Hydraulic System Recommendations
  • Parts

Air Compressor & Hydraulic Output with Integral Hydraulic Tank

CFM Rating 40 CFM @ High Speed / 30 CFM @ idle Speed Air Pressure 150 PSI
Hydraulic Flow* Up to 13 GPM Hydraulic Pressure* Up to 3000 PSI
Engine Type 25 HP Kubota® Tier 4 Final Drive system Belt Driven
Fuel Type Diesel Fuel Capacity Plumb to Chassis or Remote Tank
Compressor Type Rotary Screw    

Dimensions with fittings (In.) – 47.6 L x 21.0 W x 33.4 H*

Dimensions listed are not a complete representation of total space necessary.  Please consult Vanair for overall space and air requirements.

Dry weight (Lbs.) – 802

*Ratings are approximate and are based on 120° F hydraulic fluid temperature. Hydraulic relief valve is set at 3300 PSI. Consult Vanair for specific details.

  • Small Compact Design
  • Can Be Side-Mounted or Bed-Mounted
  • Can Power a Separate Cab Climate Control System


  • 40 CFM Rotary Screw Encapsulated Air End
  • Belt-Driven
  • Lifetime Warranty on Air End
  • Integrated Inlet


  • Rated @ 10.5 RPM @ 2000 PSI and 8.5 RPM @ 3000 PSI
  • Variable Displacement Pump


  • Small Compact Design
  • Powder-Coated, Galvanneal Sheet Metal Enclosure


  • Low Engine Oil Shut Down
  • Alternator Failure Indicator
  • Service Access Door Shut Down
  • Engine Over Temp Shut Down
  • Air Pressure Safety Relief Valve And Automatic Blow-Down On Shut Down
  • High-Temperature & High-Pressure Compressor Shut Down
  • Oil Fill Plug Safety Relief
  • Hydraulic Oil Pressure-Relief Valve


  • Remote Control Panel
  • Engine Start/Stop
  • Engine Fault Lights
  • Hour Meter
  • Compressor/Hydraulic On/Off Switch
  • Speed Control Switch
  • Compressor Fault Light


  • HInged Top and Removable Front Panel
  • Spin-On Air-To-Oil Separator

  • Air Reservoirs
  • After Coolers
  • Air Hoses
  • Filter/Lubricator/Regulator (FLR)
  • Hose Reels
  • Moisture Separators
  • Tool Oilers
  • Air Tools
  • Maintenance Kits
  • Receptacles

* All tanks include a drain, check & pressure relief valve.

All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. The hydraulic ratings listed are at sea level. Performance may be affected when operating at altitudes above 4,000 feet.

Vanair highly recommends consulting a hydraulic supply expert for specifying the oil reservoir size, hydraulic cooler, additional pressure relief(s), and other hydraulic supply components for your application. Please take into consideration the following:

  • The hydraulic flow and pressure requirements of the hydraulic tools
  • When hydraulic tools are running, there is a continuous hydraulic load and an external hydraulic cooler is needed
  • Duty cycle and ambient operating temperatures.

For more information please consult Vanair.

Part Description Part Number
Initial 50 Hours Service Kit (One Gal. of Vanguard™ Oil & Oil Filter) KIT1285
Vanguard™ Lifetime Warranty Service Kit (One Gal. Vanguard™ Oil, Oil Filter and Air Filter) KIT1182
Engine Service Kit (Includes 2 QT Oil, Oil Filter, Air Filter and Pre-Filter) KIT1291
Engine Service Kit (Includes Oil, Air & Fuel Filters) KIT1292
Vanguard™ Premium Green Oil (Four Pack) 264626-4GREEN
Vanguard™ Premium Oil (Four Gal.) 264626-4PACK