The Reliant™ RS85-L provides a whopping 85 CFM of air power at almost half the weight of its predecessor. Enough power, in fact, to operate a 90 lb. jack hammer or 4” piercing tool or 1-1/2 inch impact wrench or assist in air gouging. No other brand of hydraulic driven abovedeck systems can even come close. The RS85-L is designed with an aluminum air end and canopy to reduce weight and to protect against rust. Its compact footprint increases deck space on your truck, and its sound attenuation design decreases noise levels for comfortable operation.
Reliant™ RS85-L Hydraulic Driven Aluminum Air Compressor
Now 30% Lighter Than its Predecessor. More Powerful Than the Competition. Quieter Operation.
| Capacity (CFM) | Air Pressure (PSI) | Compressor RPM | Hydraulic Flow (GPM) | Hydraulic Pressure (PSI) |
|---|---|---|---|---|
| 60 | 100 | 1950 | 14.0 | 2500 |
| 60 | 150 | 1975 | 14.2 | 2750 |
| 70 | 100 | 2275 | 16.5 | 2650 |
| 70 | 150 | 2300 | 16.8 | 2800 |
| 80 | 100 | 2650 | 18.5 | 2800 |
| 80 | 150 | 2650 | 18.8 | 3075 |
| 85 | 100 | 2850 | 19.7 | 2800 |
| 85 | 125 | 2850 | 19.9 | 2950 |
Compressor Dimensions with fittings (In.) – 38.55L X 21.0W X 24.64H
Dimensions listed are not a complete representation of total space necessary. Please consult Vanair® for overall space and air requirements.
Dry Weight (Lbs.) – 285
*Ratings are approximate and are based on 120˚F hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Vanair® for specific details. **85 CFM @ 150 PSI systems may require additional cooling.
- 051795 — Reliant™ RS85-L, 85 CFM, Open Center, 12V, Analog Gauges
- 051796 — Reliant™ RS85-L, 85 CFM, Open Center, 12V, Cold Weather, Analog Gauges
PERFORMANCE
- 60-85 CFM and up to 150 PSI
- Ambient Operating Range of -20°F to +125°F
- Lightweight
- Six-Pin Weatherproof Electrical Connection
- Hydraulic Cooling Assist for Additional Hydraulic Systems
- 12V DC Model Available
- Open Center or Closed Center Hydraulic Manifold Block
ENCAPSULATED AIR COMPRESSOR
- Direct-Driven Aluminum Encapsulated Rotary Screw Air End
- Bolt-On Inlet Valve
- Integral Air-to-Oil Separator Tank
- Lifetime Warranty on Air End
- Made in the USA
AIR-TO-OIL COOLER
- Capable of Cooling Up to 150 PSI
- Ambient Operating Range of -20 ˚F to + 125 ˚F
HYDRAULIC COOLER
- Integrated Cooler Reduces Heat in Truck Hydraulic System
HYDRAULICS
- Gear-Type Motor
- Hydraulic Oil In – 3/4” 37 Degree JIC (#12)
- Hydraulic Oil Out – 1” 37 Degree JIC (#16)
- Open Center or Closed Center
- Hydraulic Case Drain – 3/8” 37 Degree JIC (#6)
- Hydraulic Load Sense Line – 1/4” 37 Degree JIC (#4)*
INSTRUMENTATION STANDARD
- Conveniently Located and Easy to Read Temperature, Hour, and Pressure Gauges
- Relocatable
SAFETY EQUIPMENT
- Air Pressure Relief Safety Valve
- Open Center Hydraulic Oil Pressure Relief Valve
- Automatic Blow-Down on Shutdown
- High-Temperature and High-Pressure Shutdown
- Vented Fill Cap
SERVICEABILITY/CONVENIENCE
- Reversible Hinged Hood
- Access Panel for Easy Accessibility for Oil Changes
- JIC Fittings on Front of Machine for Hydraulic and Air Connections for Convenience
CANOPY
- Lightweight Powder-Coated Aluminum Sheet Metal Enclosure
- Single Point Lifting Bail
COLD WEATHER PACKAGE (OPTIONAL)
- Integrated System with Hydraulic Thermal Valve
- 20 – 60 Gallon Air Reservoirs
- Aftercoolers
- Air Hoses
- Air Tools
- Hose Reels and Fittings
- OSHA Excess Flow Safety Valve
- Service/Control Line Moisture Separators
- Tool Oiler/Lubricator
- Service Airline De-Icer
- Filter Regulator Lubricator (FRL) 1/2”
- 24 VDC to 12VDC Converter; IP68 Rated (Required When Installing on a 24VDC Chassis)
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).
For more information please consult Vanair®.
| Part Description | Part Number |
|---|---|
| Initial 50 Hour Compressor Maintenance Kit | KIT1212 |
| Every 500 Hour or Annual Compressor Maintenance Kit | KIT1221 |
| 1 Gallon of Vanguard™ Premium Rotary Screw Compressor Oil | 264626-1GAL |
| Vanair® Compressor Oil Filter | 266801 |
| 80 CFM Compressor Air Filter Element Only | 265546-004 |
| Vanair® Spin-On Air/Oil Separator | 273080 |
| Air Reservoir Tank – 28 Gallons | 032707 |
| Air Reservoir Tank – 14 Gallon | 032708 |
| Filter Lubricator Regulator (FLR) 1/2” | 264493 |
| Moisture Separator | 265243 |
| Vibration Isolator Kit – 1/2” | KIT1202-001 |
| Air Reservoir Tank – 30 Gallons | OA49645 |
