The DR 500 delivers the power, performance and durability that you demand to get the job done. Available with either an integral shaft drive or hydraulic drive cooling system to fit your needs, the DR 500 features a Sullair® rotary screw air end and comes with a remote separator tank for flexible mounting and easy maintenance.
DR 500 and DR 500HF Drill Modules
500 CFM @ 200 PSI of Air Power. Delivering 100 or 200 PSI with a Single-Stage Compressor System.
Air Compressor
| DR500 | DR500HF | |
|---|---|---|
| Rated Capacity (CFM) | 500 CFM (13.5 m3/min) | 500 CFM (14.2 m3/min) |
| Pressure (PSI) | 200 PSI (13.8 bar) | 200 PSI (13.8 bar) |
| RPM Input (RPM) | 2000 RPM* | 2100 RPM* |
| Input BHP Required (HP) | 173 (129 kW) | 174 (130 kW) |
| Tank Discharge (SAE) | 2 In. NPT | 2 In. NPT |
Physical Specifications
| DR500 | DR500HF | |
|---|---|---|
| Compressor Module Weight | 1365 lbs | 1661 lbs |
| Separator Tank Weight | 335 lbs | 335 lbs |
Fan Power Requirements
| Fan Drive Method- DR 500 | Compressor Input Shaft |
| Fan Drive Method- DR 500HF | Hydraulic |
| Hydraulic Flow Required | 13.5 GPM |
| Hydraulic Pressure Required | 700 PSIG |
| Hydraulic Connections (Inlet and Outlet) | 3/4 In. JIC |
| Case Drain Provided | 3/8 In. JIC |
Compressor Dimensions with Fittings (L x W x H):
DR 500
- 40 x 36 x 54* (in)
- 1016 x 914 x 1346* (mm)
DR 500HF
- 44 x 38 x 40* (in)
- 1118 x 965 x 1016* (mm)
Dimensions listed are not a complete representation of total space necessary. Please consult Vanair® for overall space and air requirements.
PERFORMANCE
- 500 CFM Up to 200 PSI
- Industry Leading Rotary Screw Air Compressor
- Compact Design
- Easy to Operate and Maintain
- Simple Controls and Piping
- Built for Harsh Environments
- Made in the USA
AIR COMPRESSOR
- Rotary Screw Air Compressor
- Single-Stage
- Field Proven Performance
- Recirculating Valve for Noise Reduction
- Discharge Pipe SAE 2.5-Inch Code 61 Flange with Leak-Free Fittings
DISCHARGE TANK
- Vertical Design for Smaller Footprint and Better Angle of Operation
- In-Tank Coalescer for Longevity
- Minimum Pressure Valve
- Pressure Relief Valve
- Oil Scavenge Sight Glass
- Coalescer Restriction Indicator
AIR-TO-OIL COOLER
- Ambient Operating Range of -20 °F to +120 °F
AIR FILTER
- Dual Two-Stage Air Filters with Dust Evacuators for Clean Air
- Air Restriction Indicator
INSTRUMENTATION
- Conveniently Located, Easy-to-Read Temperature and Pressure Gauge
- Oil Level Sight Glass
SERVICEABILITY
- Easily Accessible Air Filters and Coalescers for Routine Service
- Independent Separator Tank for Ease of Maintenance
- Hinged–Top Roof and Access Panel for Maintenance and Adjustments
- Dust Evacuator for Easy Filter Maintenance
SAFETY
- High-Temperature Shutdown
- Air Pressure Relief Safety Valve
- Automatic Blowdown on Shutdown
- Oil Fill Plug Safety Relief
- Minimum Pressure Valve
CONVENIENCE
- Mounting Provisions on the Bottom of the Frame
- Heavy Duty Frame with Integral Forklift Tubes
- Powder Coated, Galvanneal Sheet Metal Enclosure
- Drive Hub
- Adapter for hydraulic motor
- SAE “D” face adapter
- Vanguard™ Rotary Screw Compressor Oil
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).
