500 CFM @ 200 PSI of Air Power. Delivering 100 or 200 PSI with a Single-Stage Compressor System.

The DR 500 delivers the power, performance and durability that you demand to get the job done. Available with either an integral shaft drive or hydraulic drive cooling system to fit your needs, the DR 500 features a Sullair® rotary screw air end and comes with a remote separator tank for flexible mounting and easy maintenance.

Get a Quote
Vanair® DR 500 and DR 500HF Drill Modules
Vanair® Air Compressor Icon

Air Compressor

DR500DR500HF
Rated Capacity (CFM)500 CFM (13.5 m3/min)500 CFM (14.2 m3/min)
Pressure (PSI)200 PSI (13.8 bar)200 PSI (13.8 bar)
RPM Input (RPM)2000 RPM*2100 RPM*
Input BHP Required (HP)173 (129 kW)174 (130 kW)
Tank Discharge (SAE)2 In. NPT2 In. NPT

Physical Specifications

DR500DR500HF
Compressor Module Weight1365 lbs1661 lbs
Separator Tank Weight335 lbs335 lbs

Fan Power Requirements

Fan Drive Method- DR 500Compressor Input Shaft
Fan Drive Method- DR 500HFHydraulic
Hydraulic Flow Required13.5 GPM
Hydraulic Pressure Required700 PSIG
Hydraulic Connections (Inlet and Outlet)3/4 In. JIC
Case Drain Provided3/8 In. JIC

Compressor Dimensions with Fittings (L x W x H):

DR 500

  • 40 x 36 x 54* (in)
  • 1016 x 914 x 1346* (mm)

DR 500HF

  • 44 x 38 x 40* (in)
  • 1118 x 965 x 1016* (mm)

Dimensions listed are not a complete representation of total space necessary. Please consult Vanair® for overall space and air requirements.

PERFORMANCE

  • 500 CFM Up to 200 PSI
  • Industry Leading Rotary Screw Air Compressor
  • Compact Design
  • Easy to Operate and Maintain
  • Simple Controls and Piping
  • Built for Harsh Environments
  • Made in the USA

AIR COMPRESSOR

  • Rotary Screw Air Compressor
  • Single-Stage
  • Field Proven Performance
  • Recirculating Valve for Noise Reduction
  • Discharge Pipe SAE 2.5-Inch Code 61 Flange with Leak-Free Fittings

DISCHARGE TANK

  • Vertical Design for Smaller Footprint and Better Angle of Operation
  • In-Tank Coalescer for Longevity
  • Minimum Pressure Valve
  • Pressure Relief Valve
  • Oil Scavenge Sight Glass
  • Coalescer Restriction Indicator

AIR-TO-OIL COOLER

  • Ambient Operating Range of -20°F to +120°F

AIR FILTER

  • Dual Two-Stage Air Filters with Dust Evacuators for Clean Air
  • Air Restriction Indicator

INSTRUMENTATION

  • Conveniently Located, Easy-to-Read Temperature and Pressure Gauge
  • Oil Level Sight Glass

SERVICEABILITY

  • Easily Accessible Air Filters and Coalescers for Routine Service
  • Independent Separator Tank for Ease of Maintenance
  • Hinged–Top Roof and Access Panel for Maintenance and Adjustments
  • Dust Evacuator for Easy Filter Maintenance

SAFETY

  • High-Temperature Shutdown
  • Air Pressure Relief Safety Valve
  • Automatic Blowdown on Shutdown
  • Oil Fill Plug Safety Relief
  • Minimum Pressure Valve

CONVENIENCE

  • Mounting Provisions on the Bottom of the Frame
  • Heavy Duty Frame with Integral Forklift Tubes
  • Powder Coated, Galvanneal Sheet Metal Enclosure

All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).

Vanair - Mobile Power Solutions