Introducing the Roadside Vehicle Assistance Kit!

The EPEQ® Roadside Vehicle Assistance Kit is the perfect solution for Clean, Quiet, Power™ for emergency roadside responders. With the EPEQ® AIR20 reciprocating air compressor, you can fill tires and use pneumatic tools easily. Powered by two (2) ELiMENT® LiFePO4 batteries, the system runs with low noise and fumes, ensuring a quiet and safe working environment. The kit also includes a 3kW inverter for AC power for electrical devices, and shore power for recharging at the end of the day. A 12V to 48V DC to DC converter is included to keep your battery charged throughout the day. The level two EPEQ® EV Charger allows for onsite mobile charging, while the 5000A lithium-ion Start•All Jump•Pack® allows for remote engine starting.

EPEQ® ROADSIDE VEHICLE ASSISTANCE KIT INCLUDES:

  • ELiMENT® Battery (2)
  • EPEQ® AIR20 Compressor (1)
  • EPEQ® EV Charger (1)
  • EPEQ® INVERTER3000 (1)
  • EPEQ® INVERTER5000 (2)
  • EPEQ® DC-DC Converter (1)
  • EPEQ® Shore Power Charger (1)
  • Start•All Jump•Pack® (1)
  • EPEQ® Smart Controller (1)
EPEQ® IM Payback Calculator

(2) ELiMENT® Batteries

  • Capacity: 100 Ah
  • Voltage: 48
  • Cycles: 5,000
  • Material: Lithium Iron Phosphate
  • Protections: Over-Current, Short-Circuit, Over-Charge, Over-Discharge, Over-Temperature, and Under-Temperature
  • EPEQ® Battery Management System
  • Size: 13” L x 13“ W x 12“ H with Handles
  • Weight: 107 lbs.

(1) EPEQ® AIR20 Compressor

  • Motor: PMAC
  • Compressor Type: Reciprocating
  • Two Speed; 10 CFM and 20 CFM
  • 150 PSI Maximum
  • Drive System: Dual V-Belt
  • Capacity: 100 Ah
  • Low Speed Run Time: 120 Minutes
  • High Speed Run Time: 600 Minutes
  • Size: 19” L x 14” W x 24” H
  • Weight: 90 lbs.

(1) EPEQ® EV Charger- Level 2

  • Size: 4.49” L x 2.82” W x 9.59” H
  • Weight: 20 lbs.

(1) EPEQ® INVERTER3000

  • Watts: 3000
  • Input Voltage: 48VDC High-Frequency Topology
  • Output: 120VAC Pure Sine Wave
  • GFCI Outlet
  • Simple Remote Connection to Add Additional Outlets
  • Remote On/Off
  • Size: 18” L x 5” W x 10” H
  • Weight: 10 lbs.

(2) EPEQ® INVERTER5000

  • 48V, 240VAC, 5kW
  • Size: 13” L x 5” W x 20” H
  • Weight: 30 lbs.

(1) EPEQ® DC-DC Converter

  • Optional 12VDC Input to 48V, 20A or 30A Output
  • Featuring Industry Leading Safeties and Internal Cooling
    Capabilities
  • Size: 10” L x 3” W x 6” H
  • Weight: 5 lbs.

(1) EPEQ® Shore Power Charger

  • 120VAC
  • Size: 11” L x 4” W x 8” H
  • Weight: 10 lbs.

(1) Start•All Jump•Pack®

  • 5000A, 12VDC
  • Size: 11” L x 4” W x 11” H
  • Weight: 10 lbs.

(1) EPEQ® Smart Controller

  • LED Display with Anti-Glare Coating
  • IP67 Rated
  • Reads and Reports:
    – State of Charge
    – Charge / Discharge Rates and Cycles
    – Cell Voltage Levels
    – Battery Temperature
  • Faults and Warnings:
    – Over-Charge and Over-Discharge
    – Over-Temperature and Under-Temperature

(1) Optional Reservoir Tank

  • Optional 14 or 20-Gallon Air Reservoir Tank
  • Size: 37” L x 15.5” W x 18” H
  • Weight: 53 lbs.

Video: Testimonial

Video: Operational

Vanair - Mobile Power Solutions