Frequently Asked Questions
How do I find the right maintenance kit for my Engine Driven System?
Start with the model number and serial number on the nameplate of your machine. The serial number identifies the exact compressor end and engine configuration — both of which determine the correct kit. For PRO 25 and PRO 35 models, part numbers are listed in the tables above. For Contractor, Viper™ Gas, and Viper™ Diesel models, contact the Vanair® Parts team at (219) 879-5100 with your serial number and they will confirm the correct kit.
What is included in a Vanair® Engine Driven Systems maintenance kit?
Kits are pre-assembled with the exact filters, fluids, and wear components required for a specific service interval — typically the initial 20-hour break-in or the 100-hour/annual routine service. Each kit covers both the compressor side and the engine side in a single order, so you are not sourcing individual components separately.
How often do Engine Driven Systems need to be serviced?
Reciprocating systems (PRO 25, PRO 35, Contractor) require an initial break-in service at 20 hours, then routine maintenance every 100 hours or annually — whichever comes first. Rotary screw systems (Viper™ Gas, Viper™ Diesel) follow a 50-hour break-in and 500-hour or annual routine service schedule. High-dust operating environments shorten filter inspection intervals regardless of system type.
Can I use non-OEM parts on my Vanair® Engine Driven System?
Using non-OEM components on a system under warranty can void coverage if a failure occurs. Beyond warranty risk, rotary screw compressor ends operate at tight tolerances — an air filter element with the wrong micron rating or a separator that does not seat correctly can introduce contaminants into the oil circuit and cause premature wear on the screw element. Genuine Vanair® parts are the only components tested and approved for your specific system.
Do maintenance kits cover both the compressor and the engine?
Yes, for PRO 25 and PRO 35 models, separate kits are available for the compressor end and the engine (Honda® or Kohler®). This allows you to service the compressor side and the engine side on the same schedule without overstocking components. For other models, contact Vanair® to confirm whether a combined or split kit applies to your configuration.
How do I contact Vanair® for parts support or warranty questions?
Vanair® parts support and warranty questions are handled by the Vanair® Service Department, reachable at 1-844-826-7378. For online parts ordering, genuine OEM maintenance kits, and replacement parts for all Vanair® Engine Driven Systems models, find a Vanair® Authorized Parts Distributor near you or shop their online store. When contacting service, have your machine package serial number and compressor serial number ready — both are required to confirm your exact configuration and process warranty or RMA requests.
