Vanair’s inclusive, innovative, indispensable Air N Arc® I-300 is the first system in the world to offer six forms of power in a single 48” unit with full multi-functioning capabilities. The Air N Arc® I-300 unique system allows you to turn off the trucks engine while still supporting the electrical of the truck, so all the emergency lighting can still be used without fear of killing the truck battery. Based on the technology of the Air N Arc® 300 Diesel system, it provides an integrated 40 CFM rotary screw compressor, 7 kW AC generator, 300 AMP welder, battery booster and battery charger, with the added power of a 13 GPM hydraulic pump…all driven by a single engine. The Air N Arc® I-300 offers enough power to run a crane and the technology to integrate with the crane control.
Air N Arc® I-300 ALL-IN-ONE Power System®
The ALL-IN-ONE Power System® Six Forms of Power Plus Multi-Functioning CapabilitiesAir Compressor | Generator | Welder | Battery Booster | Battery Charger | Hydraulics
| Engine: | 25 HP Kubota®, Liquid Cooled (Tier 4 Compliant) |
| Compressor Type: | Rotary Screw |
| CFM Rating: | 40 CFM Free Air at High Speed, 30 CFM Free Air at Idle |
| Max Pressure: | 175 PSI |
| Generator Wattage: | 7 kW Peak – 6.8 kW Continuous, AC Power, 60 Hz, Single Phase, 120V GFCI and 240V Outlets |
| Hydraulic Output: | Up to 13 GPM, Up to 3000 PSI (10.5 GPM Hydraulic Piston Pump) |
| Welder Amperage: | High Frequency DC Welding,270 AMPs at 100% Duty Cycle CC: 40-300 AMPs Operating Range, CV: 15-30 Volts |
| Battery Booster/Charger: | 300 AMPs 12/24V Boost, 50 AMP 12V Charge |
| Drive System: | Belt Driven |
| Fuel Tank: | Plumb to Chassis or Optional 12 Gal Remote Tank. |
Dimensions –
Foot Print (In.) – 47.1L x 21.0W x 33.4H
Dry Weight with Control Panel (Lbs.) – 852
Dimensions listed are not a complete representation of total space necessary. Please consult Vanair® for overall space and air requirements.
Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.
- 050790 — Air N Arc® I-300 – Open System (Up to 3000 PSI and 12V Fuel Pump)
- 051065 — Air N Arc® I-300 – Closed System (Up to 3000 PSI and 12V Fuel Pump)
- One Unit Incorporates Air Compressor, Generator, Battery Booster, Battery Charger, Welder and Hydraulic Pump. No Need for Auxiliary Plug-In Welder or Battery Booster
- Reliable and Easy Electric Starting Kubota® Engine
- Heavy Duty Belt Drive System for Anti-Vibration and Long Service Intervals
- Electric Fuel Pump for Ease of Chassis Fuel System Integration
- Capable of Charging Vehicle’s Battery.
- True Two Generator System for Safe Multifunction of Welder and Electric Tools
- CV Functionality for Voltage Sensing Suitcase Feeder for MIG Welding
- Auto Speed Control for Weld/Battery Boost Function
- Rotary Screw Air Compressor for Air On Demand
- Integrated Lift Hook and Battery Tray
- Battery Jump Start Receptacle
- Manual Reset AC Circuit Breakers
- Designed for Easy Maintenance and Fuel Efficiency
- Small Footprint – Will Fit on Side Pack or Behind Cab
- Powder Coated Sheet Metal
- Galvannealed Canopy
AIR COMPRESSOR
- Rotary Screw Compressor – Encapsulated
- 40 CFM @ 100 PSI; 30 CFM @ Idle
- 175 Max PSI
GENERATOR
- 7 kW Peak
- 6.8 kW Continuous @ 60 Hz
- Independent AC Power for Safe Multi-Functioning
- Brushless
- Smooth Wave for Minimal Distortion
- Two-120V GFCI Outlets and One-240V Outlet
COLD WEATHER PACKAGE
- Standard 12V Chassis Powered Thermal Blankets for Cold Weather
WELDER
- High Frequency DC Welding
- CC Range 40 – 300 AMPs Operating Range
- CV Range 15 – 30 Volts
- 270 AMPs at 100% Duty Cycle
- Independent Welding Generator
- Safe Multi-Function
- Auto Speed Control
- CV MIG Capability
BATTERY BOOST/CHARGE
- 300 AMP 12V/24V Boost
- 50 AMP 12V Charge
- Capable of Jump Starting Your Truck’s Engine
- Maintains Truck’s Battery and Operates Work and Emergency Lights While Engine is Off
REMOTE CONTROL PANEL (HARNESS NOT INCLUDED)
- Provides Ultimate User Convenience and Safety
- All Functions Accessible at Panel. No Need to Jump In and Out of Vehicle.
- Filter/Lubricator/Regulator (FLR)
- Hose Reels and Fittings
- OSHA Safety Valve (Velocity Fuse)
- Post Drivers
- Service/Control Line Moisture Separators
- Tool Oiler/Lubricator
HYDRAULIC PUMP
- Up to 13 GPM
- 3000 Maximum PSI
- Variable Displacement Hydraulic Piston Pump Compatible with Both an Open Center and Closed Center System
- 25 HP Kubota® Engine, Liquid Cooled
- Electric Start
- Glow Plug
- Welding Cables – 25’, 50’
- Welding Helmet with Auto Darkening Lens
- Battery Booster Cables
- Cable Extension Segment
- Fuel Tank – Slimline 11 Gallons
- Remote Air Tank – 30 Gallons
- Remote Condensation Drain
- Hose Reels
- 120V Cold Weather Thermal Blankets
- 120V Engine Block Heater
- Maintenance Kits
- Welding Rods
- Dry Cell Battery
- GFCI Outlet for Protection of 120V/240V – Remote Panel Machines Only
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: the hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).
For more information please consult Vanair®.
| Part Description | Part Number |
|---|---|
| Every 500 Hour or Annual Compressor Maintenance Kit | KIT1153 |
| KUBOTA™ D902 Every 200 Hour or Annual Engine Maintenance Kit | KIT1154-01 |
| Initial 50 Hour Compressor Maintenance Kit | KIT1285 |
| Compressor Air Filter Element Only | 264469 |
| Vanair® Spin-On Air/Oil Separator | 264470 |
| Vanair® Compressor Oil Filter | 264471 |
| 1 Gallon of Vanguard™ Premium Rotary Screw Compressor Oil | 264626-1GAL |
| KUBOTA™ Inline Fuel Filter | 280724 |
| Vanair® Compressor/Engine Air Filter Element Only | 276688-002 |
| KUBOTA® Spin-On Fuel Filter | EN273303-01 |
| KUBOTA® Inline Fuel Filter | RC276268 |
| KUBOTA® Fuel Filter Element Only | RC77662 |
| KUBOTA® Oil Filter | EN38480 |
| Air Reservoir Tank – 28 Gallons | 032707 |
| Air Reservoir Tank – 14 Gallons | 032708 |
| Optional Weld Cable Set 25′ | 033020-25 |
| Optional Weld Cable Set 50′ | 033020-50 |
| Filter Lubricator Regulator (FLR) 1/2” | 264493 |
| Moisture Separator | 265243 |
| Vibration Isolator Kit – 1/2” | KIT1202-001 |
| Remote Mount Control Panel Connection Harness – 6ft | MA269937-06 |
| Remote Mount Control Panel Connection Harness – 10ft | MA269937-10 |
| Remote Mount Control Panel Connection Harness – 18ft | MA269937-18 |
| Remote Mount Control Panel Connection Harness – 22ft | MA269937-22 |
| Remote Mount Control Panel Connection Harness – 26ft | MA269937-26 |
| Battery Boost Cables, 2 Gauge With Quick Connect Ends, 25ft | MA269938 |
| Battery Boost Quick Disconnect | MA269944 |
| Battery Cable Extension, 2 Gauge, 8ft | MA269945-08 |
| Battery Cable Extension, 2 Gauge, 12ft | MA269945-12 |
| Battery Cable Extension, 2 Gauge, 16ft | MA269945-16 |
| Battery Cable Extension, 2 Gauge, 20ft | MA269945-20 |
| Battery Cable Extension, 2 Gauge, 24ft | MA269945-24 |
| Extensions Segment for Boost Cable, 2 Gauge Cable with Connectors | MA270012-25 |
| Extension Segment for Boost Cable, 2 Gauge Cable with Connectors, 50ft | MA270012-50 |
| Fuel Tank Assembly, Diesel, Slimline 11 Gallon, Fuel Gauge Sender | OA032930 |
| Air Reservoir Tank – 30 Gallons | OA49645 |
