EPEQ® Light Duty/ Service and Maintenance Vehicle Kit

Powering Fleet Electrification™ with Clean, Quiet, Power™!

Vanair® is leading the charge in end-to-end electrification solutions by offering 100% of the components needed for a complete green technology system. EPEQ® is a comprehensive, end-to-end, patent pending system, of zero emission and clean, quiet Electrified Power Equipment® products. Powered by Vanair’s EPEQ® Smart Controller, which communicates with ELiMENT™ Lithium Iron Phosphate (LiFePO4) batteries, EPEQ® allows you to turn off the vehicle’s engine and still run the equipment you need on the job. EPEQ® is a fully self-contained and independent system that can be mounted on, or within, combustion engine vehicles, electric vehicles, or even on trailers. The EPEQ® Light Duty/ Service and Maintenance Vehicle Kit has everything you need to electrify your van fleet whether that be for mobile repair service, elevator service, forklift service, and more.

 

EPEQ® LIGHT DUTY/ SERVICE AND MAINTENANCE VEHICLE KIT INCLUDES:

*Estimated Package Weight: 240 lbs.

  • ELiMENT™ 100Ah Battery
  • EPEQ® AIR20 Compressor
  • EPEQ® INVERTER3000
  • EPEQ® Shore Power
  • Optional 14 or 20-Gallon Air Reservoir Tank
  • Optional EPEQ® 12V to 48V (20A or 30A) Converter/Charger
Contact Us
EPEQ® IM Payback Calculator
EPEQ™ Light Duty Service/ Maintenance Kit

Product Specifications

(1) ELiMENT™ Battery

  • Capacity: 100 Ah
  • Voltage: 48
  • Cycles: 5,000
  • Material: Lithium Iron Phosphate
  • Protections: Over-Current, Short-Circuit, Over-Charge, Over-Discharge, Over-Temperature, and Under-
    Temperature
  • EPEQ® Battery Management System
  • Size: 13” L x 13“ W x 12“ H with Handles
  • Weight: 107 lbs.

(1) EPEQ® AIR20 Compressor

  • Motor: PMAC
  • Compressor Type: Reciprocating
  • Two Speed; 10 CFM and 20 CFM
  • 150 PSI Maximum
  • Drive System: Dual V-Belt
  • Capacity: 100 Ah
  • Low Speed Run Time: 120 Minutes
  • High Speed Run Time: 600 Minutes
  • Size: 19” L x 14” W x 24” H
  • Weight: 90 lbs.

(1) EPEQ® INVERTER3000

  • Watts: 3000
  • Input Voltage: 48VDC High-Frequency Topology
  • Output: 120VAC Pure Sine Wave
  • GFCI Outlet
  • Simple Remote Connection to Add Additional Outlets
  • Remote On/Off
  • Size: 18” L x 5” W x 10” H
  • Weight: 10 Lbs.

(1) EPEQ® Shore Power Charger

  • 120VAC
  • Size: 11” L x 4” W x 8” H
  • Weight: 10 lbs.

(1) EPEQ® Smart Controller

  • LED Display with Anti-Glare Coating
  • IP67 Rated
  • Reads and Reports:
    – State of Charge
    – Charge / Discharge Rates and Cycles
    – Cell Voltage Levels
    – Battery Temperature
  • Faults and Warnings:
    – Over-Charge and Over-Discharge
    – Over-Temperature and Under-Temperature

(1) Optional EPEQ® DC-DC Converter

  • Optional 12VDC Input to 48V, 20A or 30A Output
  • Featuring Industry Leading Safeties and Internal Cooling Capabilities
  • Size: 10” L x 3” W x 6” H
  • Weight: 5 lbs.

(1) Optional Reservoir Tank

  • Optional 14 or 20-Gallon Air Reservoir Tank
  • Size: 37” L x 15.5” W x 18” H
  • Weight: 53 lbs.

Video: Testimonial

Video: Testimonial

Video: Operational

Video: Operational

Vanair - Mobile Power Solutions