Powering Fleet Electrification™ with Clean, Quiet, Power™!

Vanair® is leading the charge in end-to-end electrification solutions by offering 100% of the components needed for a complete green technology system. EPEQ™ is a comprehensive, end-to-end, patent pending system, of zero emission and clean, quiet Electrified Power Equipment® products. Powered by Vanair’s EPEQ™ Smart Controller, which communicates with ELiMENT™ Lithium Iron Phosphate (LiFePO4) batteries, EPEQ™ allows you to turn off the vehicle’s engine and still run the equipment you need on the job. EPEQ™ is a fully self-contained and independent system that can be mounted on, or within, combustion engine vehicles, electric vehicles, or even on trailers. The EPEQ™ Medium Duty Service Vehicle Kit has everything you need to electrify your service truck.

Why Choose the EPEQ™ Solution?

  • Clean, Quiet, Power™
  • Zero Fumes, Reduced Emissions, and Idle Mitigation
  • No Extensive Heat Build-up
  • Fuel Cost Savings/ Lowest Cost of Ownership
  • Modular to Adapt to Future State Needs

EPEQ™ MEDIUM DUTY SERVICE VEHICLE KIT INCLUDES:

*Estimated Package Weight: 395 lbs.

  • ELiMENT™ Battery (2)
  • EPEQ™ AIR45 Compressor
  • EPEQ™ INVERTER3000
  • EPEQ™ DC-DC Converter
  • EPEQ™ Shore Power Charger
  • EPEQ™ WELDER140
EPEQ™ IM Payback Calculator
EPEQ™ Medium Duty Service Kit

(2) ELiMENT™ Batteries

  • Capacity: 100 Ah
  • Voltage: 48
  • Cycles: 5,000
  • Material: Lithium Iron Phosphate
  • Protections: Over-Current, Short-Circuit, Over-Charge, Over-Discharge, Over-Temperature, and Under-Temperature
  • EPEQ™ Battery Management System
  • Size: 13” L x 13“ W x 12“ H with Handles
  • Weight: 107 lbs.

(1) EPEQ™ AIR45 Compressor

  • Compressor Type: Rotary Screw
  • 20-45 CFM
  • 150 PSI Maximum
  • Drive System: Direct
  • Modular Cooler Can Be Remote Mounted
  • Size: 26” L x 13” W x 19” H
  • Weight: 160 lbs.

(1) EPEQ™ Shore Power Charger

  • 120VAC
  • Size: 11” L x 4” W x 8” H
  • Weight: 10 lbs.

(1) EPEQ™ INVERTER3000

  • Watts: 3000
  • Input Voltage: 48VDC High-Frequency Topology
  • Output: 120VAC Pure Sine Wave
  • GFCI Outlet
  • Simple Remote Connection to Add Additional Outlets
  • Remote On/Off
  • Size: 18” L x 5” W x 10” H
  • Weight: 10 lbs.

(1) EPEQ™ WELDER140

  • Lithium Powered, Contains Internal Battery
  • CC Welding Capacities
  • Capacity: 140A Stick Welder
  • Duty Cycle: 20% 140A; 50% 110A; 100% 80A
  • Size: 18” L x 8” W x 15” H
  • Weight: 34 lbs.

(1) EPEQ™ Smart Controller

  • LED Display with Anti-Glare Coating
  • IP67 Rated
  • Reads and Reports:
    – State of Charge
    – Charge / Discharge Rates and Cycles
    – Cell Voltage Levels
    – Battery Temperature
  • Faults and Warnings:
    – Over-Charge and Over-Discharge
    – Over-Temperature and Under-Temperature

(1) Optional EPEQ™ DC-DC Converter

  • Optional 12VDC Input to 48V, 20A or 30A Output
  • Featuring Industry Leading Safeties and Internal Cooling
    Capabilities
  • Size: 10” L x 3” W x 6” H
  • Weight: 5 lbs