The Reliant™ RS85-LYM Hydraulic Driven Air Compressor, designed for the rigorous demands of surface and subsurface mining operations, sets a new standard in performance, durability, and reliability for compressed air systems. Delivering up to 85 CFM and up to 150 PSI, it promises to reduce downtime, and minimize maintenance, and service. This makes it the ideal solution for maximizing productivity and efficiency in harsh and corrosive environments.
Reliant™ RS85-LYM Hydraulic Driven Air Compressor
| Capacity (CFM) | 60 | 60 | 70 | 70 | 80 | 80 | 85 | 85 |
| Air Pressure (PSI) | 100 | 150 | 100 | 150 | 100 | 150 | 100 | 125 |
| Compressor (RPM) | 1950 | 1975 | 2275 | 2300 | 2650 | 2650 | 2850 | 2850 |
| Hydraulic Flow (GPM)* | 14.0 | 14.2 | 16.5 | 16.8 | 18.5 | 18.8 | 19.7 | 19.9 |
| Hydraulic Pressure (PSI)* | 2500 | 2750 | 2650 | 2800 | 2800 | 3075 | 2800 | 2950 |
Reliant™ RS85-LYM Unit Dimensions with fittings (In.): 34.73L X 21.23W X 24.78H | Dry Weight (Lbs.): 285 Lbs
Dimensions listed are not a complete representation of total space necessary. Please consult Vanair® for overall space and air requirements.
* Ratings are approximate and are based on 120˚F hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Vanair® for specific details.
- 051878-002 — Reliant™ RS85-LYM, Rotary Screw Open Center Air Compressor, 24V, Less Yellow Metal with Remote Panel
ENCAPSULATED AIR COMPRESSOR
- Direct-Driven Aluminum Encapsulated Rotary Screw Air End
- Bolt-On Inlet Valve
- Integral Air-to-Oil Separator Tank
- Lifetime Warranty on Air End
- Made in the USA
- Two-Stage Air Filter
AIR-TO-OIL COOLER
- Capable of Cooling Up to 150 PSI
- Ambient Operating Range of -20˚F to +125˚F
- Brushless Fan
HYDRAULIC COOLER
- Integrated Cooler Reduces Heat in Truck Hydraulic System
HYDRAULICS
- Gear-Type Motor
- Open Center
- Hydraulic Oil In – 3/4”, 37 Degree JIC (#12)
- Hydraulic Oil Out – 1”, 37 Degree JIC (#16)
- Hydraulic Case Drain – 3/8”, 37 Degree JIC (#6)
- Stainless Steel Tubes
HARNESS
- No Internal Splices
- Sealed Connectors
- Point-to-Point Design
CANOPY
- Lightweight Powder-Coated Aluminum Sheet Metal Enclosure
- Single Point Lifting Bail
INSTRUMENTAL STANDARD
- IP67 Rated Remote Digital Display Enclosed in NEMA Enclosure
- Remote Digital Display Includes Provisions for Compressor Temperature, Air Pressure, and Hour Meter
- Remote Digital Display Includes a 12’ Harness
SAFETY EQUIPMENT
- Stainless Steel Air Pressure Relief Safety Valve
- Open Center Hydraulic Oil Pressure Relief Valve
- Automatic Blow-Down on Shutdown
- High-Temperature and High-Pressure Shutdown
- Vented Fill Cap
SERVICEABILITY/CONVENIENCE
- Reversible Hinged Hood
- Access Panel for Easy Accessibility for Oil Changes
- JIC Fittings on Front of Machine for Hydraulic and Air Connections for Convenience
- Extended Sight Glass for Easy Oil Level Check
- 20 – 60 Gallon Air Reservoirs
- Aftercoolers
- Air Hoses
- Air Tools
- Hose Reels and Fittings
- Stainless Steel OSHA Safety Valve (Velocity Fuse)
- Service/Control Line Moisture Separators
- Tool Oiler/Lubricator
- Service Airline De-Icer
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).
For more information please consult Vanair®.
