Robustly engineered and field tested, a Vanair® system will meet your challenge day after day. The Vanair® two-stage drill compressor modules are a compact solution to limited space requirements on today’s rigs. Available in a wide range of capacities, Vanair’s two-stage drill modules are designed and built to meet rigorous demands. Vanair’s vast engineering experience, flexibility in design and custom solutions provide you with a one-stop shop for all your air compressor needs.
Two-Stage Drill Modules
Powerful and Versatile Two-Stage Drill Modules Providing Big Air of up to 1350 CFM and 350 PSI.
| Model | Fan Type | Delivery CFM (m3/m) | Pressure * PSIG (bar) | RPM * | Power * BHP (kW) | Module Weight(lbs) | Tank Weight(lbs) | Dimensions L x W x H (in.) | Dimensions L x W x H (mm) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| DR 770HP | Hydraulic | 770 (21.8) | @ | Up to 350 (24) | @ | 1800 | 302 (225) | 4310 | 600 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 900HP | Hydraulic | 900 (25.6) | @ | Up to 350 (24) | @ | 1800 | 344 (257) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1050HP | Hydraulic | 1050 (29.7) | @ | Up to 350 (24) | @ | 1800 | 463 (345) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1050HP | Hydraulic | 1050 (29.7) | @ | Up to 350 (24) | @ | 2100 | 461 (344) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1150HP | Hydraulic | 1150 (32.6) | @ | Up to 350 (24) | @ | 1800 | 463 (345) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1150HP | Hydraulic | 1150 (32.6) | @ | Up to 350 (24) | @ | 2100 | 461 (344) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1250HP | Hydraulic | 1250 (36.3) | @ | Up to 350 (24) | @ | 1800 | 513 (382) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1250HP | Hydraulic | 1250 (36.4) | @ | Up to 350 (24) | @ | 2100 | 496 (370) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1350HP | Hydraulic | 1350 (38.7) | @ | Up to 350 (24) | @ | 1800 | 556 (414) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
| DR 1350HP | Hydraulic | 1350 (38.2) | @ | Up to 350 (24) | @ | 2100 | 560 (418) | 4410 | 1262 | 55 x 55 x 55 | 1397 x 1397 x 1397 |
*For other deliveries, pressure and speeds, please consult factory. The horsepower figures represent nominal BHP needed at the input shaft and additional hydraulic power is needed for the hydraulic fan modules. Consult factory for flows and pressure for hydraulic fan requirements. Modules do not include drive system. All modules include a separate receiver tank with a minimum pressure and relief valve.
Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligation.
PERFORMANCE
- Two-Stage Drill Modules= Up to 1350 CFM Up to 350 PSI
- Industry Leading Rotary Screw Air Compressor
- Compact Design
- Easy to Operate and Maintain
- Simple Controls and Piping
- Built for Harsh Environments
- Made in the USA
AIR COMPRESSOR
- Rotary Screw Air Compressor
- Two-Stage
- Field Proven Performance
- Recirculating Valve for Noise Reduction
- Discharge Pipe SAE 2.5-Inch Code 61 Flange with Leak-Free Fittings
DISCHARGE TANK
- Vertical Design for Smaller Footprint and Better Angle of Operation
- In-Tank Coalescer for Longevity
- Minimum Pressure Valve
- Pressure Relief Valve
- Oil Scavenge Sight Glass
- Coalescer Restriction Indicator
AIR-TO-OIL COOLER
- Ambient Operating Range of -20 °F to +120 °F
AIR FILTER
- Dual Two-Stage Air Filters with Dust Evacuators for Clean Air
- Air Restriction Indicator
INSTRUMENTATION
- Conveniently Located, Easy-to-Read Temperature and Pressure Gauge
- Oil Level Sight Glass
SERVICEABILITY
- Easily Accessible Air Filters and Coalescers for Routine Service
- Independent Separator Tank for Ease of Maintenance
- Hinged–Top Roof and Access Panel for Maintenance and Adjustments
- Dust Evacuator for Easy Filter Maintenance
SAFETY
- High-Temperature Shutdown
- Air Pressure Relief Safety Valve
- Automatic Blowdown on Shutdown
- Oil Fill Plug Safety Relief
- Minimum Pressure Valve
CONVENIENCE
- Mounting Provisions on the Bottom of the Frame
- Heavy Duty Frame with Integral Forklift Tubes
- Powder Coated, Galvanneal Sheet Metal Enclosure
- Drive Hub
- Adapter for hydraulic motor
- SAE “D” face adapter
- Vanguard™ Rotary Screw Compressor Oil
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).
