EPEQ® EPTO Hydraulic System

Introducing the EPEQ® EPTO Hydraulic System!

Experience a more efficient and clean way of powering your crane or boom truck with the Vanair® EPEQ® EPTO Hydraulic System. Designed for electric vehicles or those without a traditional PTO setup, the EPEQ® EPTO provides up to 15 gallons per minute and 3000 PSI of hydraulic power to operate any hydraulic circuit. It is composed of two (2) Vanair® proprietary ELiMENT® Batteries, an electric motor optimized for performance, and a hydraulic pump. The EPEQ® EPTO enables you to work with the engine turned off, resulting in lower noise levels and zero emissions, making it ideal for indoor or residential use.

 

EPEQ® EPTO Applications Include:

  • Aerial Lifts or Bucket Trucks
  • Elevated Work Platforms
  • Telescopic and Articulating Cranes
  • Tool Circuits
  • High and Low-Pressure Water Pumps
GET A QUOTE
EPEQ® EPTO Hydraulic Power

Product Specifications

EPEQ® EPTO PERFORMANCE

  • MAX Flow – 15.00 GPM (Measured at 1000 PSI)
  • MAX Pressure – 3000 PSI (at 13.5 GPM)
  • Connect to 2x ELiMENT® Batteries
  • Operational Power Usage:
    • 15 GPM @ 1000PSI = 5400W
    • 14.4 GPM @ 1500 PSI = 7600W
    • 14.4 GPM @ 2000 PSI = 10000W
      • 10000W Equivalent to 1C Rate When Using 2x ELiMENT® 100 Batteries = 50+ Minutes of Runtime
    • 13.5 GPM @ 3000 PSI = 15000W
      • 15000W Equivalent to 1.5C Rate When Using 2x ELiMENT® 100 Batteries = Up to 30 Minutes Runtime in Optimal Conditions

 

EPEQ® EPTO CONTROL MODULE

  • Size: 16.19” L x 10.16” W x 7.57” H
  • Weight: 34 lbs.

 

EPEQ® EPTO MOTOR MODULE

  • Size: 19.91” L x 10.03” W x 11.10” H
  • Weight: 137 lbs.

(2) ELiMENT® BATTERY

  • Capacity: 100 Ah
  • Voltage: 48
  • Cycles: 5,000
  • Material: Lithium Iron Phosphate
  • Protections: Over-Current, Short-Circuit, Over-Charge,
    Over-Discharge, Over-Temperature and Under-Temperature
  • EPEQ® Battery Management System
  • Size: 13.38” L x 12.5“ W x 11.8“ H with Handles
  • Weight: 107 lbs.

 

(1) EPEQ® SMART DISPLAY

  • LED Display with Anti-Glare Coating
  • IP67 Rated
  • Reads and Reports:
    • State of Charge
    • Charge / Discharge Rates and Cycles
    • Cell Voltage Levels
    • Battery Temperature
  • Faults and Warnings:
    • Over-Charge and Over-Discharge
    • Over-Temperature and Under-Temperature

Key Features

  • Clean and Quiet Power – No Emissions, Reduced Noise
  • Delivers Variable Hydraulic Flow Rates
  • Soft-Start for Reduced Initial Start-Up Pressure Spikes
  • Allows Full hydraulic Crane / Boom Performance via Battery Power
  • Operates Similarly to Traditional PTO or Pump Systems – No Need to Modify Your Hydraulic Equipment
  • Customizable to Meet Your Specific Needs
Vanair - Mobile Power Solutions